The Siemens 6SE6440-2UE31-1CA1, also identified as 6SE64402UE311CA1, is a high-performance Siemens MICROMASTER 440 frequency inverter designed for variable-speed control of three-phase AC motors in demanding industrial automation and machinery applications. This drive provides an 11 kW / 15 HP constant-torque rating and a 15 kW / 20 HP square-law torque rating. It is designed for 3-phase 500–600 VAC ±10% input power at 47–63 Hz. The unit is an unfiltered version with an IP20 protection rating. Siemens identifies the 6SE6440-2UE31-1CA1 as a MICROMASTER 440 spare part.
The 6SE6440-2UE31-1CA1 is engineered for reliable motor control where controlled speed, acceleration, deceleration, and efficient frequency regulation are required. Siemens specifies a constant-torque output current of approximately 17 A and a low-overload output current of approximately 22 A. The drive also provides high-overload capability of 150% output current for 60 seconds and 200% for 3 seconds, making it suitable for applications that experience demanding starting and load conditions.
The MICROMASTER 440 platform supports flexible variable-frequency operation for industrial machinery and automation systems. The 6SE6440-2UE31-1CA1 supports an output frequency of up to 650 Hz for V/f control, subject to applicable frequency limitations. The drive uses fan cooling and is designed for an ambient operating temperature of approximately -10°C to +50°C under high-overload operation. Its dimensions are approximately 245 x 185 x 195 mm (H x W x D).
York Scientific offers professionally refurbished Siemens 6SE6440-2UE31-1CA1 MICROMASTER 440 AC Drives that are thoroughly inspected, professionally cleaned, electrically tested, and functionally verified before shipment. Each unit undergoes a comprehensive quality assurance process to help provide a dependable replacement solution while helping reduce equipment downtime and extend the service life of existing Siemens industrial drive systems.
Our repair process is as simple as it is fast: enter details below and we will email you an RMA number along with the shipping instructions. Once we receive your defective equipment, our service team will contact and assist you until your repair is completed.
The Siemens 6SE6440-2UE31-1CA1 MICROMASTER 440 AC Drive is commonly used in a wide range of industrial motor-control and automation applications, including:
Every refurbished Siemens 6SE6440-2UE31-1CA1 MICROMASTER 440 AC Drive undergoes a detailed quality assurance process before shipment. Each unit is carefully inspected, professionally cleaned, electrically tested, and functionally verified by experienced technicians to help ensure dependable performance in demanding industrial environments.
York Scientific follows rigorous refurbishment and testing procedures to provide reliable replacement automation components. Each drive is evaluated for proper electrical and operational performance before shipment. This process provides a cost-effective alternative to purchasing new equipment while helping maintain existing Siemens motor-control systems and minimize unnecessary production downtime.
York Scientific offers professional repair and exchange services for the Siemens 6SE6440-2UE31-1CA1 MICROMASTER 440 AC Drive. Our experienced technicians can perform comprehensive diagnostics, component-level troubleshooting, electronic repairs, rebuilding, and functional testing to help restore industrial drive equipment to dependable operating condition.
If your existing 6SE6440-2UE31-1CA1 is malfunctioning, displaying fault conditions, or experiencing intermittent performance issues, professional repair and refurbishment can help extend the service life of the existing drive system. Repairing or replacing a compatible refurbished unit can also help reduce equipment downtime and maintenance costs.
Yes. Every refurbished Siemens 6SE6440-2UE31-1CA1 is thoroughly inspected, professionally cleaned, electrically tested, and functionally verified before shipment to help ensure dependable operation.
The Siemens 6SE6440-2UE31-1CA1 has an 11 kW / 15 HP constant-torque rating and a 15 kW / 20 HP square-law torque rating.
The Siemens 6SE6440-2UE31-1CA1 is designed for 3-phase 500–600 VAC ±10% input power at 47–63 Hz. It is an unfiltered MICROMASTER 440 drive.
The Siemens 6SE6440-2UE31-1CA1 MICROMASTER 440 is designed for variable-speed control of compatible three-phase AC motors in industrial automation, manufacturing machinery, conveyors, machine tools, pumps, fans, material handling systems, and other demanding motor-control applications.
Yes. York Scientific provides diagnostic, repair, refurbishment, and exchange services for Siemens industrial drives, including MICROMASTER 440 equipment. Professional repair and refurbishment can provide a cost-effective way to restore an existing drive system and extend the useful service life of compatible equipment.
Looking for the Siemens 6SE6440-2UE31-1CA1 Refurbished MICROMASTER 440 11 kW AC Drive? Contact York Scientific today for pricing, product availability, repair services, or exchange options. Our experienced team is ready to help you find a dependable Siemens replacement drive for industrial automation, motor control, manufacturing, material handling, machine tools, pumps, fans, and legacy MICROMASTER system requirements.